Introduction:
The electrode system consists of three electrodes to address issues related to the working electrode and counter electrode failing to maintain a constant electrode potential, which can lead to increased measurement errors. By incorporating a reference electrode, the three-electrode system of the residual chlorine electrode is established. This system allows for continuous adjustment of the voltage applied between the working electrode and the reference electrode by utilizing the reference electrode potential and voltage control circuit. By maintaining a constant potential difference between the working electrode and the reference electrode, this setup offers benefits such as high measurement accuracy, prolonged working life, and reduced need for frequent calibration.With potentiostatic method measurement, the bimetal ring extends the service life, accelerates the response time and the signal is stable.The electrode shell is made of glass +POM material, which can withstand high temperature of 0~60℃.The lead adopts high-quality four-core shielding wire for residual chlorine sensor, and the signal is more accurate and stable.This flow is designed for the measurement of residual chlorine by potentiostatic method and can also be combined with other sensors. The design principle allows the sample to pass through the electrode position at a constant speed through the check valve to adjust the flow rate.
Technical Specifications:
Power Supply: 9~36 VDC
Power Consumption: ≤0.2 W
Signal Output: RS485 MODBUS RTU
Measuring Element: Dual Platinum Ring
Housing Material: Glass + POM
Waterproof Rating: Measuring Part IP68
Transmitter Part IP65
Measuring Range: 0.01-20.00 mg/L (ppm)
Measurement Accuracy: ±1% F.S.
Pressure Range: ≤0.3 MPa
Temperature Range: 0-60°C
Calibration Method: Sample Calibration, Comparison Calibration
Connection Method: 4-core Separate Cable
Installation Thread: PG13.5
Applicable Scope: Tap Water, Drinking Water, etc.
Power Consumption: ≤0.2 W
Signal Output: RS485 MODBUS RTU
Measuring Element: Dual Platinum Ring
Housing Material: Glass + POM
Waterproof Rating: Measuring Part IP68
Transmitter Part IP65
Measuring Range: 0.01-20.00 mg/L (ppm)
Measurement Accuracy: ±1% F.S.
Pressure Range: ≤0.3 MPa
Temperature Range: 0-60°C
Calibration Method: Sample Calibration, Comparison Calibration
Connection Method: 4-core Separate Cable
Installation Thread: PG13.5
Applicable Scope: Tap Water, Drinking Water, etc.
Write your message here and send it to us
