Digital Transmitter and Sensors Series
-
CS1797C Industrial Online PH Sensor RS485 Organic solvents Digital Online Ph Sensor
compatible with a variety of analog signal electrodes. Complete functions, stable performance, easy operation, low power consumption, safety and reliability are the outstanding advantages of this instrument. This instrument is equipped with RS485 transmission interface, which can be connected to the host computer through ModbusRTU protocol to realize monitoring and recording. It can be widely used in industrial occasions such as thermal power generation, chemical industry, metallurgy, environmental protection, pharmaceutical, biochemical, food and tap water.
Industrial Online Multi Water Quality Monitoring Combination pH Sensor pH Electrode Probe For Wastewater treatment -
Digital COD Sensor Chemical Oxygen Demand Electrode Probe RS485 CS6602HD
COD sensor is a UV absorption COD sensor, combined with a lot of application experience, based on the original basis of a number of upgrades, not only the size is smaller, but also the original separate cleaning brush to do one, so that the installation is more convenient, with higher reliability. It does not need reagent, no pollution, more economic and environmental protection.On-line uninterrupted water quality monitoring.Automatic compensation for turbidity interference, with automatic cleaning device, even if long-term monitoring still has excellent stability.
Sensor features:
Digital sensor, RS-485 output, support Modbus
No reagent, no pollution, more economic and environmental protection
Automatic compensation of turbidity interference, with excellent test performance
With self-cleaning brush, can prevent biological attachment, maintenance cycle more -
Digital Turbidity Sensor with Automatic Cleaning CS7835D
Typical application:
The principle of the turbidity sensor is based on the combined infrared absorption and scattered light method. The ISO7027 method can be used to continuously and accurately determine the turbidity value. According to ISO7027 infrared double-scattering light technology is not affected by chromaticity to determine the sludge concentration value. The self-cleaning function can be selected according to the use environment. Stable data, reliable performance; built-in self-diagnosis function to ensure accurate data; simple installation and calibration.
The electrode body is made of 316L stainless steel, which is corrosion-resistant and more durable. The seawater version can be plated with titanium, which also performs well under strong corrosion. Fully automatic electrode scraper, self-cleaning function, effectively prevent solid particles from covering the lens, improve measurement accuracy, and prolong use accuracy.
IP68 waterproof design, can be used for input measurement. Real-time online recording of Turbidity/MLSS/SS, temperature data and curves, compatible with all water quality meters of our company. -
CS6401D Water Quality Sensor RS485 Blue-Green Algae Sensor
CS6041D blue-green algae sensor uses the characteristic of cyanobacteria having absorption peak and emission peak in the spectrum to emit monochromatic light of a specific wavelength to the water. Cyanobacteria in the water absorb the energy of this monochromatic light and release monochromatic light of another wavelength. The light intensity emitted by cyanobacteria is proportional to the content of cyanobacteria in the water.Based on the fluorescence of the pigments to measurement the target parameters , it can be identified before the impact of algal bloom.No need for extraction or other treatment, rapid detection, to avoid the impact of shelving water samples;Digital sensor, strong anti-interference ability, long transmission distance;Standard digital signal output can be integrated and networked with other devices without controller. -
Digital Conductivity Sensor For Water CS3501D
Designed for Pure, Boiler Feed water, Power Plant, Condensate Water.
Easy to connect to PLC, DCS, industrial control computers, general purpose controllers, paperless recording instruments or touch screens and other third party devices.
Conductivity sensor technology is an important field of engineering and technology research, used for the liquid conductivity measurement, is widely used in human production and life, as electric power, chemical industry, environmental protection, food, the semiconductor industry research and development, Marine industrial production and essential in the development of technology, a kind of testing and monitoring devices.The conductivity sensor is mainly used to measure and detect industrial production water, human living water, seawater characteristics and battery electrolyte properties. -
Online Blue Green Algae Sensor with Self-Cleaning T6401
Industrial Blue-Green Algae Online Analyzer is an online water quality monitor and control instrument with microprocessor. It is widely used in power plants, petrochemical industry, metallurgical electronics, mining, paper industry, food and beverage industry, environmental protection water treatment, aquaculture and other industries. The Blue-Green Algae value and temperature value of water solution are continuously monitored and controlled.The principle of CS6401D Blue-Green Algae Sensor is using the characteristics of cyanobacteria who has absorption peaks and emission peaks in the spectrum. The absorption peaks emit monochromatic light into the water, cyanobacteria in the water absorbs the energy of monochromatic light, releasing monochromatic light of emission peak of another wavelength. The light intensity emitted by cyanobacteria is
proportional to the content of cyanobacteria in water. -
SC300OIL Portable Oil-in-water Analyzer
The online oil in water sensor adopts the principle of ultraviolet fluorescence method. The fluorescence method is more efficient and faster, with better repeatability, and can be monitored online in real time. Self-cleaning brush can be used to effectively eliminate the influence of oil on the measurement. Suitable for oil quality monitoring, industrial circulating water, condensate, wastewater treatment, surface water stations and other water quality monitoring scenarios. -
CS3742D Conductivity Sensor
Designed for Pure, Boiler Feed water, Power Plant, Condensate Water.
Easy to connect to PLC, DCS, industrial control computers, general purpose controllers, paperless recording instruments or touch screens and other third party devices. -
CS3533CD Digital EC Sensor
Conductivity sensor technology is an important field of engineering and technology research, used for the liquid conductivity measurement, is widely used in human production and life, as electric power, chemical industry, environmental protection, food, the semiconductor industry research and development, Marine industrial production and essential in the development of technology, a kind of testing and monitoring devices.The conductivity sensor is mainly used to measure and detect industrial production water, human living water, seawater characteristics and battery electrolyte properties. -
CS3733D Digital Conductivity Sensor
Designed for Pure, Boiler Feed water, Power Plant, Condensate Water.
Easy to connect to PLC, DCS, industrial control computers, general purpose controllers, paperless recording instruments or touch screens and other third party devices.
Conductivity sensor technology is an important field of engineering and technology research, used for the liquid conductivity measurement, is widely used in human production and life, as electric power, chemical industry, environmental protection, food, the semiconductor industry research and development, Marine industrial production and essential in the development of technology, a kind of testing and monitoring devices.The conductivity sensor is mainly used to measure and detect industrial production water, human living water, seawater characteristics and battery electrolyte properties. -
Digital Optical RS485 Nitrite Nitrogen Sensor NO2-N
Principle
NO2 has an absorption at 210nm ultraviolet light. During operation, the sample flows through the slit, and the light emitted by the light source passes through the slit. Some of the light is absorbed by the moving sample in the slit, while the rest of the light passes through the sample and reaches the detector on the other side of the probe, where the nitrate concentration value is calculated. -
Digital RS485 Optical Nitrate Nitrogen Sensor NO3-N
Principle
NO3 has an absorption at 210nm ultraviolet light. During operation, the sample flows through the slit, and the light emitted by the light source passes through the slit. Some of the light is absorbed by the moving sample in the slit, while the rest of the light passes through the sample and reaches the detector on the other side of the probe, where the nitrate concentration value is calculated.