Factory Free sample Fischer Conductivity Meter - CS6602D Digital COD Sensor – Chunye Detail:
Introduction
COD sensor is a UV absorption COD sensor, combined with a lot of application experience, based on the original basis of a number of upgrades, not only the size is smaller, but also the original separate cleaning brush to do one, so that the installation is more convenient, with higher reliability.
It does not need reagent, no pollution, more economic and environmental
protection.On-line uninterrupted water quality monitoring.Automatic compensation for turbidity interference, with automatic cleaning device, even if long-term monitoring still has excellent stability.
Testing principle
Many organic compounds dissolved in water are absorbent to ultraviolet light. Therefore, the total amount of organic pollutants in the water can be measured by measuring the extent to which these organics absorb ultraviolet light at 254nm.The sensor uses two light sources — 254nm UV and 550nm UV reference light — to automatically eliminate suspended matter interference, resulting in more stable and reliable measurements.
Sensor features
Digital sensor, RS-485 output, support Modbus
No reagent, no pollution, more economic and environmental protection
Automatic compensation of turbidity interference, with excellent test performance
With self-cleaning brush, can prevent biological attachment, maintenance cycle more
Measuring Range
pH:-2~16.00pH; ORP:-2000~+2000mV; Tempreature:-10~150.0℃;
Technical parameters
Name | Parameter |
Interface | Support RS-485, MODBUS protocols |
COD Range | 0.75 to 500mg/L equiv.KHP |
COD Accuracy | <5% equiv.KHP |
COD Resolution | 0.01mg/L equiv.KHP |
TOC Range | 0.3 to 150mg/L equiv.KHP |
TOC Accuracy | <5% equiv.KHP |
TOC Resolution | 0.1mg/L equiv.KHP |
Tur Range | 0-300 NTU |
Tur Accuracy | <3% or 0.2NTU |
Tur Resolution | 0.1NTU |
Temperature Range | +5 ~ 45℃ |
Housing IP Rating | IP68 |
Maximum pressure | 1 bar |
User Calibration | one or two points |
Power Requirements | DC 12V +/-5% ,current<50mA(without wiper) |
Sensor OD | 50 mm |
Sensor Length | 214 mm |
Cable Length | 10m (default) |
Product detail pictures:
Related Product Guide:
High quality Very first,and Shopper Supreme is our guideline to offer the most beneficial company to our clients.Nowadays, we're hoping our best to be certainly one of the top exporters in our area to satisfy consumers additional will need for Factory Free sample Fischer Conductivity Meter - CS6602D Digital COD Sensor – Chunye , The product will supply to all over the world, such as: Germany, Slovenia, Lisbon, With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the best, but we're trying our best to be your good partner.
By Pag from Chicago - 2018.12.30 10:21
This is a very professional and honest Chinese supplier, from now on we fell in love with the Chinese manufacturing.
By Jean Ascher from Mauritius - 2018.10.31 10:02