Featured
-
Best quality Complex Environment ORP Electrode - CS1737 Plastic Housing pH Sensor – Chunye
Designed for Hydrofluoric acid environment. HF concentration>1000ppm The electrode is made of ultra-bottom impedance-sensitive glass film, and it also has the characteristics of fast response, accurate measurement, good stability, and not easy to hydrolyze in the case of hydrofluoric acid environment media. The reference electrode system is a non-porous, solid, non-exchange reference system. Completely avoid various problems caused by the exchange and blockage of the liquid junction,such a... -
Factory supplied Electronic Nitrate Sensor - CS1588 pH Sensor – Chunye
Pure water pH electrode •Using large-area low-resistance sensitive film bulb ≤30MΩ (at 25℃), suitable for usage in ultrapure water •Using gel electrolyte and solid electrolyte salt bridge. Pool electrode is composed of two different colloidal electrolytes. This unique technology ensures longer electrode life and reliable stability •It can be equipped with PT100, PT1000, 2.252K, 10K and other thermistors for temperature compensation •It adopts advanced solid dielectric and large area PTFE liq... -
Hot-selling Garden Soil Ph Tester - CS6511 Chloride Ion Sensor – Chunye
The online chloride ion sensor uses a solid membrane ion selective electrode for testing chloride ions floating in water, which is fast, simple, accurate and economical. • The patented chloride ion probe, with an internal reference fluid at a pressure of at least 100KPa (1Bar), seeps extremely slowly from the microporous salt bridge. Such a reference system is very stable and the electrode life is longer than the ordinary industrial electrode life • Easy to install: PG13.5 pipe thread for ... -
Hot Selling for Ph Tester For Water Near Me - CS2768 ORP Electrode – Chunye
Designed for viscous fluids, protein environment, silicate, chromate, cyanide, NaOH, seawater, brine, petrochemical, natural gas liquids, high-pressure environment. ✬The electrode material PP has high impact resistance, mechanical strength and toughness, resistance to a variety of organic solvents and acid and alkali corrosion. ✬With strong anti-interference ability, high stability and long transmission distance. No poisoning under complex chemical environment. Model No. CS2768 Measur... -
factory low price Orp Redox Meter - CS1737 Plastic Housing pH Sensor – Chunye
Designed for Hydrofluoric acid environment. HF concentration>1000ppm The electrode is made of ultra-bottom impedance-sensitive glass film, and it also has the characteristics of fast response, accurate measurement, good stability, and not easy to hydrolyze in the case of hydrofluoric acid environment media. The reference electrode system is a non-porous, solid, non-exchange reference system. Completely avoid various problems caused by the exchange and blockage of the liquid junction,such a... -
Wholesale Liquid Level Meter Monitor - Online Dissolved Oxygen Meter T6040 – Chunye
Function Industrial online dissolved oxygen meter is an online water quality monitor and control instrument with microprocessor. The instrument is equipped with different types of dissolved oxygen sensors. It is widely used in power plants, petrochemical industry, metallurgical electronics, mining, paper industry, food and beverage industry, environmental protection water treatment, aquaculture and other industries. The dissolved oxygen value and temperature value of water sol... -
High reputation Polarographic Dissolved Oxygen Sensor - CS2543 ORP Sensor – Chunye
Conventional online ORP electrode •Using PTFE large ring diaphragm to ensure the durability of the electrode; •Can be used under 6 bar pressure; •Long service life; •Optional for high alkali/high acid process glass; •Optional internal NTC temperature sensor for precise temperature compensation; •TOP 68 insertion system for reliable measurement of transmission; •Only one electrode installation position and one connecting cable are required; •Continuous and accurate ORP measurement system with... -
New Arrival China Ph Ec Tester - CS1545 pH Sensor – Chunye
1, Take use of ceramic diaphragm, so that the electricity has a stable liquid connection potential and low resistance characteristics, anti-blocking, anti-pollution. 2, High temperature resistance, 130℃ steam disinfection (disinfection 30-50 times), safety and health, in line with the requirements of food hygiene, fast response, stability, long service life. 3, With high temperature disinfection sensitive glass membrane, pH range: 0-14pH, temperature range: – 10-130 ℃, pressure range o... -
Bottom price Combined Ph And Conductivity Meter - CS1733 Plastic Housing pH Sensor – Chunye
Model No. CS1733 pH zero point 7.00±0.25pH Reference system SNEX Ag/AgCl/KCl Electrolyte solution 3.3M KCl Membrane resistance <600MΩ Housing material PP Liquid junction SNEX Waterproof grade IP68 Measurement range 0-14pH Accuracy ±0.05pH Pressure resistance ≤0.6Mpa Temperature compensation None Temperature range 0-80℃ Calibration Sample calibration, standard liquid calibration Double Junction Yes Cable length Standard 10m ca... -
High Quality Hydrofluoric Acid Resistant pH Electrode - CS3601 Conductivity Sensor – Chunye
Conductivity sensor technology is an important field of engineering and technology research, used for the liquid conductivity measurement, is widely used in human production and life, as electric power, chemical industry, environmental protection, food, the semiconductor industry research and development, Marine industrial production and essential in the development of technology, a kind of testing and monitoring devices.The conductivity sensor is mainly used to measure and detect industrial ... -
New Arrival China High Temperature Glass pH Electrode - CS7920D Online Flow-through Turbidity Sensor – Chunye
The principle of the turbidity sensor is based on the combined infrared absorption and scattered light method. The ISO7027 method can be used to continuously and accurately determine the turbidity value. According to ISO7027 infrared double-scattering light technology is not affected by chromaticity to determine the sludge concentration value. The self-cleaning function can be selected according to the use environment. Stable data, reliable performance; built-in self-diagnosis function to ens... -
New Arrival China Ph Ec Tester - TUR200 Portable Turbidity Analyzer – Chunye
Introduction Turbidity refers to the degree of obstruction caused by a solution to the passage of light. It includes the scattering of light by suspended matter and the absorption of light by solute molecules. Turbidity of water is not only related to the content of suspended matter in water, but also related to their size, shape and refraction coefficient. The organic suspended matter in the water is easy to be anaerobic fermented after deposition, which makes the water quality worse. ... -
Special Price for Tds Ec Tester - CS5530D Digital Residual Chlorine Sensor – Chunye
Drinking water: ensuring reliable disinfection Food: to ensure food safety, sanitary bag and bottle methods Public works: detection of residual chlorine Pool water: efficient disinfectant No additional instrument is required, 485 signal transmission, no interference on site, easy to integrate into various systems, and effectively reduce related use costs. The electrodes can be calibrated in the office or laboratory, and replaced directly on site, without additional on-site calibration, which ... -
New Fashion Design for Water Usage Monitoring System - Digital Suspended Solids (Sludge concentration) Sensor with Automatic Cleaning – Chunye
The principle of the Suspended Solids (Sludge concentration) is based on the combined infrared absorption and scattered light method. The ISO7027 method can be used to continuously and accurately determine the sludge concentration. According to ISO7027 infrared double-scattering light technology is not affected by chromaticity to determine the sludge concentration value. The self-cleaning function can be selected according to the use environment. Stable data, reliable performance; built-in se... -
Popular Design for Fish Farm Monitoring System - CS1778 Plastic Housing pH Sensor – Chunye
Model No. CS1778 pH zero point 7.00±0.25pH Reference system SNEX Ag/AgCl/KCl Electrolyte solution 3.3M KCl Membrane resistance <600MΩ Housing material PP Liquid junction SNEX Waterproof grade IP68 Measurement range 0-14pH Accuracy ±0.05pH Pressure resistance ≤0.6Mpa Temperature compensation NTC10K,PT100,PT1000 (Optional) Temperature range 0-80℃ Calibration Sample calibration, standard liquid calibration Double Junction Yes Cab...