Featured
-
China wholesale Seawater Environment pH Electrode - Online Immersion Type Turbidity Sensor – Chunye
Turbidity monitoring of water from waterworks, water quality monitoring of municipal pipeline network; industrial process water quality monitoring, circulating cooling water, activated carbon filter effluent, membrane filtration effluent, etc. Model No. CS7820D/CS7821D/CS7830D Power/Output 9~36VDC/RS485 MODBUS RTU Measurement mode 90°IR scattered light method Dimensions Diameter 50mm*Length 223mm Housing material POM+316 Stainless steel Waterproof rating... -
Factory Cheap Chloride Electrode - CS1797D Digital pH Sensor – Chunye
The newly designed glass bulb increases the bulb area, prevents the generation of interfering bubbles in the internal buffer, and makes the measurement more reliable. Adopt PP shell, upper and lower NPT3/4” pipe thread, easy to install, no need for sheath, and low installation cost. The electrode is integrated with pH, reference, solution grounding, and temperature compensation. 1. Using gel and solid dielectric double liquid interface structure, can be directly used in high viscosity suspens... -
One of Hottest for Residual Chlorine Meter Tester - CS1597 Glass Housing pH Sensor – Chunye
Designed for Organic Solvent and Non-aqueous Environment. The newly designed glass bulb increases the bulb area, prevents the generation of interfering bubbles in the internal buffer, and makes the measurement more reliable. Adopt glass shell, upper and lower PG13.5 pipe thread, easy to install, no need for sheath, and low installation cost. The electrode is integrated with pH, reference, solution grounding. 1, Using gel and solid dielectric double liquid interface structure, can be directly... -
OEM manufacturer Inductive Conductivity Meter - CS6718 Hardness Sensor (Calcium) – Chunye
Model No. CS6718 pH range 2.5~11 pH Measuring material PVC Film Housing material PP Waterproof rating IP68 Measurement range 0.2~40000mg/L Accuracy ±2.5% Pressure range ≤0.3Mpa Temperature compensation NTC10K Temperature range 0-50℃ Calibration Sample calibration, standard liquid calibration Connection methods 4 core cable Cable length Standard 10m cable or extend to 100m Mounting thread NPT3/4’’ Applicati... -
Factory Free sample Ozone Concentration Monitor - CS3790 Electromagnetic Conductivity Sensor – Chunye
Introduction: Electrodeless conductivity sensor generates current in the closed loop of the solution, and then measures the current to measure the conductivity of the solution. The conductivity sensor drives the coil A, which induces alternating current in the solution; coil B detects the induced current, which is proportional to the conductivity of the solution. The conductivity sensor processes this signal and displays the corresponding reading. Problems such as polarization, grease and con... -
Factory best selling Carbon Dioxide Tester For Home – Online Suspended Solids Meter T4075 – Chunye
Function The principle of the sludge concentration sensor is based on the combined infrared absorption and scattered light method. The ISO7027 method can be used to continuously and accurately determine the sludge concentration. According to ISO7027 infrared double-scattering light technology is not affected by chromaticity to determine the sludge concentration value. The self-cleaning function can be selected according to the use environment. Stable data, reliable performance; built-in... -
Factory Price Water Consumption Monitoring System - CS1729 Plastic Housing pH Sensor – Chunye
Model No. CS1729 pH zero point 7.00±0.25pH Reference system SNEX(Blue) Ag/AgCl/KCl Electrolyte solution 3.3M KCl Membrane resistance <500MΩ Housing material PP Liquid junction SNEX Waterproof grade IP68 Measurement range 0-14pH Accuracy ±0.05pH Pressure resistance ≤0.6Mpa Temperature compensation NTC10K,PT100,PT1000 (Optional) Temperature range 0-80℃ Calibration Sample calibration, standard liquid calibration Double Junction Yes ... -
Factory wholesale Ground Conductivity Meter - CS3733 Conductivity Sensor – Chunye
Specifications Measuring specific conductivity of aqueous solutions is becoming increasingly important for determining impurities in water.The measurement accuracy is greatly affected by temperature variation, polarization of the contact electrode surface, cable capacitance, etc.Twinno has designed a variety of sophisticated sensors and meters that can handle these measurements even in extreme conditions. Suitable for low conductivity applications in the semiconductor, power, water and pharm... -
Hot Sale for Ph Tester Cena - CS6710 Fluoride Ion Sensor – Chunye
And there is almost no choice of other ions in the solution. The only ion with strong interference is OH-, which will react with lanthanum fluoride and affect the determination of fluoride ions. However, it can be adjusted to determine the sample pH <7 to avoid this interference. Model No. CS6710 pH range 2.5~11 pH Measuring material PVC Film Housing material PP Waterproof rating IP68 Measurement range 0.02~2000mg/L Accuracy ±2.5% Pressure rang... -
High reputation Nitrite Sensor - CS2700 ORP Sensor – Chunye
Conventional online ORP electrode •Using PTFE large ring diaphragm to ensure the durability of the electrode; •Can be used under 6 bar pressure; •Long service life; •Optional for high alkali/high acid process glass; •Optional internal NTC temperature sensor for precise temperature compensation; •TOP 68 insertion system for reliable measurement of transmission; •Only one electrode installation position and one connecting cable are required; •Continuous and accurate ORP measurement system with... -
Manufactur standard Conductivity Meter Measures - Online Membrane Residual Chlorine Meter T4055 – Chunye
Function Online residual chlorine meter is a microprocessor-based water quality online monitoring control instrument. Typical Use This instrument is widely used in online monitoring of water supply, tap water, rural drinking water, circulating water, washing film water, disinfectant water, pool water. and other industrial processes. It continuous monitoring and control residual chlorine, pH and temperature value in aqueous solution. Mains Supply 85~265VAC±10%,50±1Hz, power ≤3W; 9~36VDC, power... -
factory customized Soil Salinity Tester - CS6720 Nitrate electrode – Chunye
The Ion Selective Electrodes can be placed directly into the sample without sample pretreatment or destruction of the sample. Best of all, Ion Selective Electrodes are inexpensive and great screening tools for identifying dissolved salts in samples. Product advantages •CS6720 Nitrate ion single electrode and composite electrode are solid membrane ion selective electrodes, used to test free chloride ions in water, which can be fast, simple, accurate and economical •The design adopts the pri... -
Factory selling Pool Salinity Meter - CS1588 Glass Housing pH Sensor – Chunye
Pure water pH electrode •Using large-area low-resistance sensitive film bulb ≤30MΩ (at 25℃), suitable for usage in ultrapure water •Using gel electrolyte and solid electrolyte salt bridge. Pool electrode is composed of two different colloidal electrolytes. This unique technology ensures longer electrode life and reliable stability •It can be equipped with PT100, PT1000, 2.252K, 10K and other thermistors for temperature compensation •It adopts advanced solid dielectric and large area PTFE liq... -
Fast delivery Electromagnetic Induct Type Conductivity Sensor - CS7920D Online Flow-through Turbidity Sensor – Chunye
The principle of the turbidity sensor is based on the combined infrared absorption and scattered light method. The ISO7027 method can be used to continuously and accurately determine the turbidity value. According to ISO7027 infrared double-scattering light technology is not affected by chromaticity to determine the sludge concentration value. The self-cleaning function can be selected according to the use environment. Stable data, reliable performance; built-in self-diagnosis function to ens... -
Hot-selling Conductivity Sensor Types - CS1745 pH electrode – Chunye
1, Take use of ceramic diaphragm, so that the electricity has a stable liquid connection potential and low resistance characteristics, anti-blocking, anti-pollution. 2, High temperature resistance, 130℃ steam disinfection (disinfection 30-50 times), safety and health, in line with the requirements of food hygiene, fast response, stability, long service life. 3, With high temperature disinfection sensitive glass membrane, pH range: 0-14pH, temperature range: – 10-130 ℃, pressure range o...