Featured
-
Top Quality Tds And Ph Tester - CS3742 Conductivity Sensor – Chunye
Specifications Measuring specific conductivity of aqueous solutions is becoming increasingly important for determining impurities in water.The measurement accuracy is greatly affected by temperature variation, polarization of the contact electrode surface, cable capacitance, etc.Twinno has designed a variety of sophisticated sensors and meters that can handle these measurements even in extreme conditions. Suitable for low conductivity applications in the semiconductor, power, water and pharm... -
Newly Arrival COD Monitor - CS6710D Digital Fluoride ion Sensor – Chunye
Model No. CS6710D Power/Outlet 9~36VDC/RS485 MODBUS Measuring material Solid film Housing material PP Waterproof rating IP68 Measurement range 0.02~2000mg/L Accuracy ±2.5% Pressure range ≤0.3Mpa Temperature compensation NTC10K Temperature range 0-80℃ Calibration Sample calibration, standard liquid calibration Connection methods 4 core cable Cable length Standard 10m cable or extend to 100m Mounting thread NPT3... -
Best Price for Total Dissolved Solids Tester Meter - Online Residual Chlorine Meter T6550 – Chunye
Function Online residual chlorine meter is a microprocessor-based water quality online monitoring control instrument. Typical Use This instrument is widely used in online monitoring of water supply, tap water, rural drinking water, circulating water, washing film water, disinfectant water, pool water. and other industrial processes. It continuous monitoring and control residual chlorine and temperature value in aqueous solution. Mains Supply 85~265VAC±10%,50±1Hz, power ≤3W; 9~36VDC, powe... -
Big Discount American Marine Orp Meter - CS1728 Plastic Housing pH Sensor – Chunye
Designed for Hydrofluoric acid environment. HF concentration < 1000ppm The electrode is made of ultra-bottom impedance-sensitive glass film, and it also has the characteristics of fast response, accurate measurement, good stability, and not easy to hydrolyze in the case of hydrofluoric acid environment media. The reference electrode system is a non-porous, solid, non-exchange reference system. Completely avoid various problems caused by the exchange and blockage of the liquid junction,such... -
Factory Outlets Water Leak Monitoring System - Online Suspended Solids Meter T4075 – Chunye
Function The principle of the sludge concentration sensor is based on the combined infrared absorption and scattered light method. The ISO7027 method can be used to continuously and accurately determine the sludge concentration. According to ISO7027 infrared double-scattering light technology is not affected by chromaticity to determine the sludge concentration value. The self-cleaning function can be selected according to the use environment. Stable data, reliable performance; built-in... -
PriceList for Sludge Level Sensor - CS3740 Conductivity Sensor – Chunye
Specifications Measuring specific conductivity of aqueous solutions is becoming increasingly important for determining impurities in water.The measurement accuracy is greatly affected by temperature variation, polarization of the contact electrode surface, cable capacitance, etc.Twinno has designed a variety of sophisticated sensors and meters that can handle these measurements even in extreme conditions. Twinno’s 4-electrode sensor has been proven to operate over a wide range of condu... -
Rapid Delivery for Ammonia Nitrogen Rapid Detector - CS2733 ORP Sensor – Chunye
Conventional online ORP electrode •Using PTFE large ring diaphragm to ensure the durability of the electrode; •Can be used under 6 bar pressure; •Long service life; •Optional for high alkali/high acid process glass; •Optional internal NTC temperature sensor for precise temperature compensation; •TOP 68 insertion system for reliable measurement of transmission; •Only one electrode installation position and one connecting cable are required; •Continuous and accurate ORP measurement system with... -
OEM Manufacturer Conductivity Meter Manual - CS6714 Ammonium Ion Sensor – Chunye
Product advantages •CS6714 Ammonium Ion Sensor is solid membrane ion selective electrodes, used to test ammonium ions in water, which can be fast, simple, accurate and economical; •The design adopts the principle of single-chip solid ion selective electrode, with high measurement accuracy; •PTEE large-scale seepage interface, not easy to block, anti-pollution Suitable for wastewater treatment in the semiconductor industry, photovoltaics, metallurgy, etc. and pollution source discharge monito... -
Factory Price Digital Dissolved Ozone Sensor Electrode RS485 - CS6710D Digital Fluoride ion Sensor – Chunye
•CS6710D Fluoride Ion sensor is solid membrane ion selective electrodes, used to test fluoride ions in water, which can be fast, simple, accurate and economical; •The design adopts the principle of single-chip solid ion selective electrode, with high measurement accuracy; •PTEE large-scale seepage interface, not easy to block, anti-pollution Suitable for wastewater treatment in the semiconductor industry, photovoltaics, metallurgy, etc. and pollution source discharge monitorin... -
Manufactur standard Ozone Monitoring Instrument - Digital Suspended Solids (Sludge concentration) Sensor with Automatic Cleaning – Chunye
Suspended Solids (Sludge concentration) monitoring of water from waterworks, water quality monitoring of municipal pipeline network; industrial process water quality monitoring, circulating cooling water, activated carbon filter effluent, membrane filtration effluent, etc. •The internal upgrade of the sensor can effectively prevent the internal circuit from dampness and dust accumulation, and avoid damage to the internal circuit. •The transmitted light adopts stable invisible n... -
Discount wholesale Total Residual Chlorine - DO200 Portable Dissolved Oxygen Meter – Chunye
Introduction The high resolution dissolved oxygen tester has more advantages in various fields such as wastewater, aquaculture and fermentation,etc. Simple operation, powerful functions, complete measuring parameters, wide measurement range; one key to calibrate and automatic identification to complete the correction process; clear and readable display interface, excellent anti-interference performance, accurate measurement, easy operation, combined with high brightness backlight ... -
Hot Selling for Ph Tester For Water Near Me - CS1768 Plastic Housing pH Sensor – Chunye
Complex environment ✬Double salt bridge design, double layer seepage interface, resistant to medium reverse seepage. ✬The ceramic hole parameter electrode seeps out of the interface, which is not easy to be blocked. ✬High-strength glass bulb design, the glass appearance is stronger. ✬Large sensing bulbs increase the ability to sense hydrogen ions, and perform well in complex environment. ✬The electrode material PP has high impact resistance, mechanical strength and toughness, resistance to a ... -
High Quality for Oil in Water Sensor - Online Ultrasonic Liquid Level Meter T6585 – Chunye
Function The Ultrasonic Liquid Level sensor can be used to continuously and accurately determine the Liquid Level. Stable data, reliable performance; built-in self-diagnosis function to ensure accurate data; simple installation and calibration. Typical Use The online Ultrasonic Liquid Level is an online analytical instrument designed to measure the Liquid Level of water from waterworks, municipal pipeline network, industrial process water quality monitoring, circulating cooli... -
Discount wholesale High Precision Chlorine Dioxide Colorimeter - CS6710 Fluoride Ion Sensor – Chunye
And there is almost no choice of other ions in the solution. The only ion with strong interference is OH-, which will react with lanthanum fluoride and affect the determination of fluoride ions. However, it can be adjusted to determine the sample pH <7 to avoid this interference. Model No. CS6710 pH range 2.5~11 pH Measuring material PVC Film Housing material PP Waterproof rating IP68 Measurement range 0.02~2000mg/L Accuracy ±2.5% Pressure rang... -
Personlized Products Gravity Analog Tds Sensor - CS3732 Conductivity Sensor – Chunye
Specifications Measuring specific conductivity of aqueous solutions is becoming increasingly important for determining impurities in water.The measurement accuracy is greatly affected by temperature variation, polarization of the contact electrode surface, cable capacitance, etc.Twinno has designed a variety of sophisticated sensors and meters that can handle these measurements even in extreme conditions. Suitable for low conductivity applications in the semiconductor, power, water and pharm...