Featured
-
Popular Design for Fieldscout Ec Meter - On-line Acid, Alkali and Salt Concentration Meter Electromagnetic Conductivity Transmitter T6038 – Chunye
Function Industrial online conductivity meter is a microprocessor-based water quality online monitoring control instrument, the salinometer measures and supervises the salinity (salt content) by conductivity measurement in fresh water. The measured value is displayed as percent and by comparing the measured value to a user defined alarm set point value, relay outputs are available to indicate if salinity is above or below the alarm set point value. Typical Use This instrument is widely use... -
Good User Reputation for Ph Tester 10 - CS1768 pH Electrode – Chunye
Designed for viscous fluids, protein environment, silicate, chromate, cyanide, NaOH, seawater, brine, petrochemical, natural gas liquids, high-pressure environment. ✬The electrode material PP has high impact resistance, mechanical strength and toughness, resistance to a variety of organic solvents and acid and alkali corrosion. ✬Digital sensor with strong anti-interference ability, high stability and long transmission distance. Model No. CS1768 pH zero point 7.00±0.25pH Reference ... -
Fast delivery Liquid Conductivity Sensor - CS1528 Glass Housing pH Sensor – Chunye
Model No. CS1528 Measure material Glass Reference system SNEX(White) Ag/AgCl/KCL Electrolyte solution 3.3M KCl Membrane resistance <600MΩ Housing material PP Liquid junction Porous ceramics Waterproof grade IP68 Measurement range 0-14pH Accuracy ±0.05pH Pressure resistance ≤0.6Mpa Temperature compensation None Temperature range 0-80℃ Calibration Sample calibration, standard liquid calibration Double Junction Yes Cable length ... -
Factory making Salinity Tester Ppm - CS6602D Digital COD Sensor – Chunye
Introduction COD sensor is a UV absorption COD sensor, combined with a lot of application experience, based on the original basis of a number of upgrades, not only the size is smaller, but also the original separate cleaning brush to do one, so that the installation is more convenient, with higher reliability. It does not need reagent, no pollution, more economic and environmental protection.On-line uninterrupted water quality monitoring.Automatic compensation for turbidity interference, with... -
PriceList for Industrial Online Fluoride Electrode - CS1543 pH Sensor – Chunye
Designed for strong acid, strong base and chemical process. Model No. CS1543 pH zero point 7.00±0.25pH Reference system SNEX Ag/AgCl/KCl Electrolyte solution 3.3M KCl Membrane resistance <500MΩ Housing material Glass Liquid junction Porous ceramics Waterproof grade IP68 Measurement range 0-14pH Accuracy ±0.05pH Pressure resistance ≤0.6Mpa Temperature compensation None Temperature range 0-80℃ Calibration Sample calibration, standard l... -
Factory wholesale Sludge Level Meter Monitor - Online Conductivity / Resistivity / TDS / Salinity Meter T6530 – Chunye
Function Industrial online conductivity meter is a microprocessor-based water quality online monitoring control instrument, the salinometer measures and supervises the salinity (salt content) by conductivity measurement in fresh water. The measured value is displayed as ppm and by comparing the measured value to a user defined alarm set point value, relay outputs are available to indicate if salinity is above or below the alarm set point value. Typical Use This instrument is widely used in... -
Chinese wholesale Ph Value Tester - Online Membrane Residual Chlorine Meter T6555 – Chunye
Function Online residual chlorine meter is a microprocessor-based water quality online monitoring control instrument. Typical Use This instrument is widely used in online monitoring of water supply, tap water, rural drinking water, circulating water, washing film water, disinfectant water, pool water. and other industrial processes. It continuous monitoring and control residual chlorine, pH and temperature value in aqueous solution. Mains Supply 85~265VAC±10%,50±1Hz, power ≤3W; 9~36VDC, power... -
Discountable price Dpd Test For Residual Chlorine - CS1515D Digital pH Sensor – Chunye
The reference electrode system of CS1515D pH sensor is a non-porous, solid, non-exchange reference system. Completely avoid various problems caused by the exchange and blockage of the liquid junction,such as the reference electrode is easy to be polluted, reference vulcanization poisoning, reference loss and other problems. •RS485 Modbus/RTU output signal •Can be used under 6bar pressure ; •Long service life; •Optional for high alkali/high acid process glass; •Optional internal NTC10K temper... -
Factory Price For Free Chlorine Sensor Residual Chlorine RS485 - CS1745 Plastic Housing pH Sensor – Chunye
Model No. CS1745 pH zero point 7.00±0.25pH Reference system SNEX Ag/AgCl/KCl Electrolyte solution 3.3M KCl Membrane resistance <800MΩ Housing material PP Liquid junction SNEX Waterproof grade IP68 Measurement range 0-14pH Accuracy ±0.05pH Pressure resistance ≤0.6Mpa Temperature compensation NTC10K,PT100,PT1000 (Optional) Temperature range 0-80℃ Calibration Sample calibration, standard liquid calibration Double Junction Yes Cab... -
Hot New Products Petrochemical Industry pH Environment Electrode - CS1668 Plastic Housing pH Sensor – Chunye
Complex environment ✬Double salt bridge design, double layer seepage interface, resistant to medium reverse seepage. ✬The ceramic hole parameter electrode seeps out of the interface, which is not easy to be blocked, and is suitable for monitoring the flue gas desulfurization environment. ✬High-strength glass bulb design, the glass appearance is stronger. ✬Large sensing bulbs increase the ability to sense hydrogen ions, and perform well in complex environment. ✬The electrode material PP has hi... -
High reputation Wireless Conductivity Sensor - CS1700 pH Sensor – Chunye
Conventional online ORP electrode •Using PTFE large ring diaphragm to ensure the durability of the electrode; •Can be used under 6 bar pressure; •Long service life; •Optional for high alkali/high acid process glass; •Optional internal NTC temperature sensor for precise temperature compensation; •TOP 68 insertion system for reliable measurement of transmission; •Only one electrode installation position and one connecting cable are required; •Continuous and accurate ORP measurement system with... -
Special Design for Electronic Salinity Meter - CS3501D Digital Conductivity Sensor – Chunye
Model No. CS7832D Power/Outlet 9~36VDC/RS485 MODBUS RTU Measurement mode 135°IR scattered light method Dimensions Diameter 50mm*Length 223mm Housing material PVC+316 Stainless steel Waterproof rating IP68 Measurement range 10-4000 NTU Measurement accuracy ±5% or 0.5NTU,whichever is grater Pressure resistance ≤0.3Mpa Measuring temperature 0-45℃ Calibration Standard liquid calibration, water sample calibration Cable length ... -
Factory Cheap Chloride Electrode - CS1729 pH Sensor – Chunye
2.Anti-corrosion material: In the strongly corrosive seawater, the SNEX CS1729 pH electrode is made of marine titanium alloy material to ensure the stable performance of the electrode. 3.The measurement data is stable and accurate: In the seawater environment, the reference electrode maintains high efficiency and stable performance, and the measuring electrode is specially designed for corrosion resistance. It ensures the stable and reliable measurement of the pH value process. 4. Low mainten... -
Hot sale Industrial Online Hardness Calcium ion Electrode - CS3852 Conductivity Sensor – Chunye
Specifications Measuring specific conductivity of aqueous solutions is becoming increasingly important for determining impurities in water.The measurement accuracy is greatly affected by temperature variation, polarization of the contact electrode surface, cable capacitance, etc.Twinno has designed a variety of sophisticated sensors and meters that can handle these measurements even in extreme conditions. Suitable for low conductivity applications in the semiconductor, power, water and pharm... -
Special Price for Food Grade Ph Tester - CS6518 Calcium ion Sensor – Chunye
Calcium ion selective electrode method for determination of calcium ions in high-pressure steam boiler feedwater treatment in power plants and steam power plants, calcium ion selective electrode method for determination of calcium ions in mineral water, drinking water, surface water, and seawater, calcium ion selective electrode method to determine calcium ions in tea, honey, feed, milk powder and other agricultural products: determine calcium ions in saliva, serum, urine and other biological...