Products
-
CS3640 Industrial Electrical Iot Conductivity Meter Monitor Tds Water Quality
Measuring specific conductivity of aqueous solutions is becoming increasingly important for determining impurities in water.The measurement accuracy is greatly affected by temperature variation, polarization of the contact electrode surface, cable capacitance, etc.Twinno has designed a variety of sophisticated sensors and meters that can handle these measurements even in extreme conditions.
Twinno's 4-electrode sensor has been proven to operate over a wide range of conductivity values. It is made of PEEK and is suitable for simple PG13/5 process connections.The electrical interface is VARIOPIN, which is ideal for this process.
These sensors are designed for accurate measurements over a wide electrical conductivity range and are suitable for use in the pharmaceutical, food and beverage industries, where product and cleaning chemicals need to be monitored.Due to industry hygiene requirements, these sensors are suitable for steam sterilization and CIP cleaning.In addition, all parts are electrically polished and the materials used are FDA-approved. -
CS3633 Online Conductivity Sensor Probe for Surface Water RS485 EC
Suitable for low conductivity applications in the semiconductor, power, water and pharmaceutical industries, these sensors are compact and easy to use.The meter can be installed in several ways, one of which is through the compression gland, which is a simple and effective method of direct insertion into the process pipeline.The sensor is made from a combination of FDA-approved fluid receiving materials.This makes them ideal for monitoring pure water systems for the preparation of injectable solutions and similar applications.In this application, the sanitary crimping method is used for installation. -
CS6401D Water Quality Sensor RS485 Blue-Green Algae Sensor
CS6041D blue-green algae sensor uses the characteristic of cyanobacteria having absorption peak and emission peak in the spectrum to emit monochromatic light of a specific wavelength to the water. Cyanobacteria in the water absorb the energy of this monochromatic light and release monochromatic light of another wavelength. The light intensity emitted by cyanobacteria is proportional to the content of cyanobacteria in the water.Based on the fluorescence of the pigments to measurement the target parameters , it can be identified before the impact of algal bloom.No need for extraction or other treatment, rapid detection, to avoid the impact of shelving water samples;Digital sensor, strong anti-interference ability, long transmission distance;Standard digital signal output can be integrated and networked with other devices without controller. -
Digital Conductivity Sensor For Water CS3501D
Designed for Pure, Boiler Feed water, Power Plant, Condensate Water.
Easy to connect to PLC, DCS, industrial control computers, general purpose controllers, paperless recording instruments or touch screens and other third party devices.
Conductivity sensor technology is an important field of engineering and technology research, used for the liquid conductivity measurement, is widely used in human production and life, as electric power, chemical industry, environmental protection, food, the semiconductor industry research and development, Marine industrial production and essential in the development of technology, a kind of testing and monitoring devices.The conductivity sensor is mainly used to measure and detect industrial production water, human living water, seawater characteristics and battery electrolyte properties. -
T6075 High Accuracy Suspended Solids Water Tester Digital SS Meter For Water Testing
The principle of the sludge concentration sensor is based on the combined infrared absorption and scattered light method. The ISO7027 method can be used to continuously and accurately determine the sludge concentration.According to ISO7027 infrared double-scattering light technology is not affected by chromaticity to determine the sludge concentration value. The self-cleaning function can be selected according to the use environment. Stable data, reliable performance; built-in self-diagnosis function to ensure accurate data; simple installation and calibration.This instrument is an analytical measurement and control instrument with highly
precision.Only skilled,trained or authorized person should carry out installation, setup and operation of the instrument.Ensure that the power cable is physically separated from the power supply when connection or repair.Once the safety problem occurs, make sure that the power to the instrument is off and disconnected. -
T4075 Suspended Solids Measurement Online Digital Turbidity Meter/tss Analyzer
The principle of the sludge concentration sensor is based on the combined infrared absorption and scattered light method. The ISO7027 method can be used to continuously and accurately determine the sludge concentration.According to ISO7027 infrared double-scattering light technology is not affected by chromaticity to determine the sludge concentration value. The self-cleaning function can be selected according to the use environment. Stable data, reliable performance; built-in self-diagnosis function to ensure accurate data; simple installation and calibration.This instrument is an analytical measurement and control instrument with highly
precision.Only skilled,trained or authorized person should carry out installation, setup and operation of the instrument.Ensure that the power cable is physically separated from the power supply when connection or repair.Once the safety problem occurs, make sure that the power to the instrument is off and disconnected. -
Online Blue Green Algae Sensor with Self-Cleaning T6401
Industrial Blue-Green Algae Online Analyzer is an online water quality monitor and control instrument with microprocessor. It is widely used in power plants, petrochemical industry, metallurgical electronics, mining, paper industry, food and beverage industry, environmental protection water treatment, aquaculture and other industries. The Blue-Green Algae value and temperature value of water solution are continuously monitored and controlled.The principle of CS6401D Blue-Green Algae Sensor is using the characteristics of cyanobacteria who has absorption peaks and emission peaks in the spectrum. The absorption peaks emit monochromatic light into the water, cyanobacteria in the water absorbs the energy of monochromatic light, releasing monochromatic light of emission peak of another wavelength. The light intensity emitted by cyanobacteria is
proportional to the content of cyanobacteria in water. -
T6540 Online Dissolved Oxygen Meter DO sensor Fish Pond Aquaculture Aquarium
Industrial online dissolved oxygen meter is an online water quality monitor and control instrument with microprocessor. The instrument is equipped with different types of dissolved oxygen sensors. It is widely used in power plants, petrochemical industry, metallurgical electronics, mining, paper industry, food and beverage industry, environmental protection water treatment, aquaculture and other industries. The dissolved oxygen value and temperature value of water solution are continuously monitored and controlled.This instrument is a special instrument for detecting oxygen content in liquids in environmental protection sewage related industries. It has the characteristics of fast response, stability,reliability,and low use cost, widely used in large-scale water plants, aeration tanks, aquaculture, and sewage treatment plants. -
SC300UVNO3 Portable NO3-N Analyzer
This portable gas detector detect gas concentration in air with pump suction method,It will make audible, visual, vibration alarm when gas concentration exceed a preset alarm point.1.Furniture, flooring, wallpaper, paint, gardening, interior decoration and renovation, dyes, paper, pharmaceutical, medical, food, corrosion 2.Disinfection, chemical fertilizers, resins, adhesives and pesticides, raw materials, samples, process and breeding plants,waste treatment plants, perm places 3.Biopharmaceutical production workshops, home environment, livestock breeding, greenhouse cultivation, storage and logistics,brewing fermentation, agricultural production -
SC300UVNO2 Portable NO2-N Analyzer
This portable gas detector detect gas concentration in air with pump suction method,It will make audible, visual, vibration alarm when gas concentration exceed a preset alarm point.1.Furniture, flooring, wallpaper, paint, gardening, interior decoration and renovation, dyes, paper, pharmaceutical, medical, food, corrosion 2.Disinfection, chemical fertilizers, resins, adhesives and pesticides, raw materials, samples, process and breeding plants,waste treatment plants, perm places 3.Biopharmaceutical production workshops, home environment, livestock breeding, greenhouse cultivation, storage and logistics,brewing fermentation, agricultural production -
SC300TURB Portable Turbidity Meter for Water Monitoring
The turbidity sensor adopts the principle of 90° scattered light.The infrared light sent by the transmitter on the sensor is absorbed, reflected and scattered by the measured object during the transmission process, and only a small part of the light can irradiate the detector. The concentration of the measured sewage has a certain relationship, so the concentration of the sewage can be calculated by measuring the transmittance of the transmitted light. -
SC300OIL Portable Oil-in-water Analyzer
The online oil in water sensor adopts the principle of ultraviolet fluorescence method. The fluorescence method is more efficient and faster, with better repeatability, and can be monitored online in real time. Self-cleaning brush can be used to effectively eliminate the influence of oil on the measurement. Suitable for oil quality monitoring, industrial circulating water, condensate, wastewater treatment, surface water stations and other water quality monitoring scenarios.