Products
-
Digital Optical RS485 Nitrite Nitrogen Sensor NO2-N
Principle
NO2 has an absorption at 210nm ultraviolet light. During operation, the sample flows through the slit, and the light emitted by the light source passes through the slit. Some of the light is absorbed by the moving sample in the slit, while the rest of the light passes through the sample and reaches the detector on the other side of the probe, where the nitrate concentration value is calculated. -
Digital RS485 Optical Nitrate Nitrogen Sensor NO3-N
Principle
NO3 has an absorption at 210nm ultraviolet light. During operation, the sample flows through the slit, and the light emitted by the light source passes through the slit. Some of the light is absorbed by the moving sample in the slit, while the rest of the light passes through the sample and reaches the detector on the other side of the probe, where the nitrate concentration value is calculated. -
Digital RS485 Output COD BOD TOC Sensor
COD sensor is a UV absorption COD sensor, combined with a lot of application experience, based on the original basis of a number of upgrades, not only the size is smaller, but also the original separate cleaning brush to do one, so that the installation is more convenient, with higher reliability.
It does not need reagent, no pollution, more economic and environmental protection.On-line uninterrupted water quality monitoring.Automatic compensation for turbidity interference, with automatic cleaning device, even if long-term monitoring still has excellent stability.
Many organic compounds dissolved in water are absorbent to ultraviolet light. Therefore, the total amount of organic pollutants in the water can be measured by measuring the extent to which these organics absorb ultraviolet light at 254nm. -
Digital RS485 Output COD BOD TOC TURBIDITY Sensor
COD sensor is a UV absorption COD sensor, combined with a lot of application experience, based on the original basis of a number of upgrades, not only the size is smaller, but also the original separate cleaning brush to do one, so that the installation is more convenient, with higher reliability.
It does not need reagent, no pollution, more economic and environmental protection.On-line uninterrupted water quality monitoring.Automatic compensation for turbidity interference, with automatic cleaning device, even if long-term monitoring still has excellent stability. -
Digital conductivity sensor series CS3742ZD
CS3740ZD Digital Conductivity Sensor: Conductivity sensor technology is an important field of engineering technology research, suitable for high-conductivity applications in semiconductor, electric power, water and pharmaceutical industries. These sensors are compact and easy to use. Determining the specific conductivity of an aqueous solution is more and more important for determining the impurities in the water. The measurement accuracy is greatly affected by factors such as temperature changes, surface polarization of contact electrodes, and cable capacitance. -
CS3740 Conductivity Sensor
Measuring specific conductivity of aqueous solutions is becoming increasingly important for determining impurities in water.The measurement accuracy is greatly affected by temperature variation, polarization of the contact electrode surface, cable capacitance, etc.Twinno has designed a variety of sophisticated sensors and meters that can handle these measurements even in extreme conditions.
Twinno's 4-electrode sensor has been proven to operate over a wide range of conductivity values. It is made of PEEK and is suitable for simple PG13/5 process connections.The electrical interface is VARIOPIN, which is ideal for this process.
These sensors are designed for accurate measurements over a wide electrical conductivity range and are suitable for use in the pharmaceutical, food and beverage industries, where product and cleaning chemicals need to be monitored.Due to industry hygiene requirements, these sensors are suitable for steam sterilization and CIP cleaning.In addition, all parts are electrically polished and the materials used are FDA-approved. -
CS3790 Electromagnetic Conductivity Sensor
Electrodeless conductivity sensor generates current in the closed loop of the solution, and then measures the current to measure the conductivity of the solution. The conductivity sensor drives the coil A, which induces alternating current in the solution; coil B detects the induced current, which is proportional to the conductivity of the solution. The conductivity sensor processes this signal and displays the corresponding reading. -
T6530 Online Conductivity / Resistivity / TDS / Salinity Meter
Industrial online conductivity meter is a microprocessor-based water quality online monitoring control instrument, the salinometer measures and supervises the salinity (salt content) by conductivity measurement in fresh water. The measured value is displayed as ppm and by comparing the measured value to a user defined alarm set point value, relay outputs are available to indicate if salinity is above or below the alarm set point value. -
T6038 On-line Acid, Alkali and Salt Concentration Meter Electromagnetic Conductivity Transmitter
Industrial on-line water quality monitoring and control instrument with microprocessor. The instrument is widely used in thermal power, chemical industry, steel pickling and other industries, such as regeneration of ion exchange resin in power plant, chemical industry process, etc., to continuously detect and control the concentration of chemical acid or alkali in aqueous solution. -
T6036 On-line Acid and Alkali Salt Concentration Meter
Industrial on-line acid/alkali/salt concentration monitor is a water quality on-line controller with microprocessor. The instrument is widely used in thermal power, chemical industry, steel pickling and other industries, such as the regeneration of ion exchange resin in power plant, chemical and chemical industrial process, etc., to continuously detect and control the concentration of chemical acid or alkali in aqueous solution. -
Acid Alkali NaCl/NaOH/HCl/NHO3/KOH Conductivity Concentration Controller/Analyzer/Meter T6036
Industrial online conductivity meter is a microprocessor-based water quality online monitoring control instrument, the salinometer measures and supervises the salinity (salt content) by conductivity measurement in fresh water. The measured value is displayed as percent and by comparing the measured value to a user defined alarm set point value, relay outputs are available to indicate if salinity is above or below the alarm set point value. -
Industrial Online Conductivity/Salinity/TDS/Resistivity Meter T4030
Industrial online conductivity meter is a microprocessor-based water quality online monitoring control instrument, the salinometer measures and supervises the salinity (salt content) by conductivity measurement in fresh water. The measured value is displayed as ppm and by comparing the measured value to a user defined alarm set point value, relay outputs are available to indicate if salinity is above or below the alarm set point value.