Professional Design Conductometer Electrode - CS1733 pH Sensor – Chunye Detail:
Designed for strong acid, strong base, waste water and chemical process.
•The electrode adopts high-quality low-noise cable, which can make the signal output longer than 20 meters without interference.
•The electrode is made of ultra-bottom impedance-sensitive glass film, and it also has the characteristics of fast response, accurate measurement, good stability, and not easy to hydrolyze in the case of low conductivity and high purity water.
|
Model No. |
CS1733 |
|
pH zero point |
7.00±0.25pH |
|
Reference system |
SNEX Ag/AgCl/KCl |
|
Electrolyte solution |
3.3M KCl |
|
Membrane resistance |
<600MΩ |
|
Housing material |
PP |
|
Liquid junction |
SNEX |
|
Waterproof grade |
IP68 |
|
Measurement range |
0-14pH |
|
Accuracy |
±0.05pH |
|
Pressure resistance |
≤0.6Mpa |
|
Temperature compensation |
None |
|
Temperature range |
0-80℃ |
|
Calibration |
Sample calibration, standard liquid calibration |
|
Double Junction |
Yes |
|
Cable length |
Standard 10m cable, can be extended to 100m |
|
Installation thread |
NPT3/4” |
|
Application |
Strong acid, strong base,waste water and chemical process
|
Product detail pictures:
Related Product Guide:
Being supported by an advanced and professional IT team, we could offer technical support on pre-sales & after-sales service for Professional Design Conductometer Electrode - CS1733 pH Sensor – Chunye , The product will supply to all over the world, such as: USA, Birmingham, Algeria, Our company regards "reasonable prices, high quality,efficient production time and good after-sales service" as our tenet. We hope to cooperate with more customers for mutual development and benefits in future. Welcome to contact us.
Good quality and fast delivery, it's very nice. Some products have a little bit problem, but the supplier replaced timely, overall, we are satisfied.
Write your message here and send it to us








