CS3640 Graphite Conductivity Electrode Water Quality

Short Description:

Measuring specific conductivity of aqueous solutions is becoming increasingly important for determining impurities in water.The measurement accuracy is greatly affected by temperature variation, polarization of the contact electrode surface, cable capacitance, etc.Twinno has designed a variety of sophisticated sensors and meters that can handle these measurements even in extreme conditions.
Twinno's 4-electrode sensor has been proven to operate over a wide range of conductivity values. It is made of PEEK and is suitable for simple PG13/5 process connections.The electrical interface is VARIOPIN, which is ideal for this process.
These sensors are designed for accurate measurements over a wide electrical conductivity range and are suitable for use in the pharmaceutical, food and beverage industries, where product and cleaning chemicals need to be monitored.Due to industry hygiene requirements, these sensors are suitable for steam sterilization and CIP cleaning.In addition, all parts are electrically polished and the materials used are FDA-approved.


  • Model No.: CS3640
  • Waterproof rating: IP68
  • Pressure resistance: ≤0.6Mpa
  • Temperature compensation: NTC10K/NTC2.2K/PT100/PT1000
  • Installation thread: NPT1/2”

Product Detail

Product Tags

CS3640 Conductivity Sensor

Specifications

Measuring specific conductivity of aqueous solutions is becoming increasingly important for determining impurities in water.The measurement accuracy is greatly affected by temperature variation, polarization of the contact electrode surface, cable capacitance, etc.Twinno has designed a variety of sophisticated sensors and meters that can handle these measurements even in extreme conditions.

Twinno's 4-electrode sensor has been proven to operate over a wide range of conductivity values. It is made of PEEK and is suitable for simple PG13/5 process connections.The electrical interface is VARIOPIN, which is ideal for this process.

These sensors are designed for accurate measurements over a wide electrical conductivity range and are suitable for use in the pharmaceutical, food and beverage industries, where product and cleaning chemicals need to be monitored.Due to industry hygiene requirements, these sensors are suitable for steam sterilization and CIP cleaning.In addition, all parts are electrically polished and the materials used are FDA-approved.

Model No.

CS3640

Cell constant

K=1.0

Electrode type

4-pole Conductivity sensor

Measure material

Graphite

Waterproof rating

IP68

Measurement range

0.1-500,000us/cm

Accuracy

±1%F.S

Pressure resistance

≤0.6Mpa

Temperature compensation

NTC10K/NTC2.2K/PT100/PT1000

Temperature range

-10-80℃

Measuring/Storage Temperature

0-45℃

Calibration

Sample calibration, standard liquid calibration

Connection methods

4 core cable

Cable length

Standard 5m cable, can be extended to 100m

Installation thread

NPT1/2”

Application

General purpose

Our company
Our company
Our company
Our company

  • Previous:
  • Next:

  • Write your message here and send it to us