CS6510 Fluoride Ion Sensor

Short Description:

The fluoride ion selective electrode is a selective electrode sensitive to the concentration of fluoride ion, the most common one is the lanthanum fluoride electrode.
Lanthanum fluoride electrode is a sensor made of lanthanum fluoride single crystal doped with europium fluoride with lattice holes as the main material. This crystal film has the characteristics of fluoride ion migration in the lattice holes.
Therefore, it has very good ion conductivity. Using this crystal membrane, the fluoride ion electrode can be made by separating two fluoride ion solutions. The fluoride ion sensor has a selectivity coefficient of 1.
And there is almost no choice of other ions in the solution. The only ion with strong interference is OH-, which will react with lanthanum fluoride and affect the determination of fluoride ions. However, it can be adjusted to determine the sample pH <7 to avoid this interference.


Product Detail

Product Tags

CS6510 Fluoride Ion Sensor

Introduction

The fluoride ion selective electrode is a selective electrode sensitive to the concentration of fluoride ion, the most common one is the lanthanum fluoride electrode. 

Lanthanum fluoride electrode is a sensor made of lanthanum fluoride single crystal doped with europium fluoride with lattice holes as the main material. This crystal film has the characteristics of fluoride ion migration in the lattice holes.

Therefore, it has very good ion conductivity. Using this crystal membrane, the fluoride ion electrode can be made by separating two fluoride ion solutions. The fluoride ion sensor has a selectivity coefficient of 1.

CS6510

And there is almost no choice of other ions in the solution. The only ion with strong interference is OH-, which will react with lanthanum fluoride and affect the determination of fluoride ions. However, it can be adjusted to determine the sample pH <7 to avoid this interference.

Model No.

CS6510

pH range

2.5~11 pH

Measuring material

PVC Film

Housing material

PP

Waterproof rating

IP68

Measurement range

0.02~2000mg/L

Accuracy

±2.5%

Pressure range

≤0.3Mpa

Temperature compensation

None

Temperature range

0-80℃

Calibration

Sample calibration, standard liquid calibration

Connection methods

4 core cable

Cable length

Standard 5m cable or extend to 100m

Mounting thread

PG13.5

Application

Industrial water, environmental protection, etc.


  • Previous:
  • Next:

  • Write your message here and send it to us