Factory Supply Conductivity TDS Sensor - Digital Suspended Solids (Sludge concentration) Sensor with Automatic Cleaning – Chunye

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our business puts emphasis over the administration, the introduction of talented staff, plus the construction of employees building, striving hard to boost the standard and liability consciousness of staff members. Our corporation successfully attained IS9001 Certification and European CE Certification of Dpd Test For Residual Chlorine, Nitrate Sensor, Soap Ph Tester, The concept of our company is "Sincerity, Speed, Service, and Satisfaction". We will follow this concept and win more and more customers' satisfaction.
Factory Supply Conductivity TDS Sensor - Digital Suspended Solids (Sludge concentration) Sensor with Automatic Cleaning – Chunye Detail:

The principle of the Suspended Solids (Sludge concentration) is based on the combined infrared absorption and scattered light method. The ISO7027 method can be used to continuously and accurately determine the sludge concentration. According to ISO7027 infrared double-scattering light technology is not affected by chromaticity to determine the sludge concentration value. The self-cleaning function can be selected according to the use environment. Stable data, reliable performance; built-in self-diagnosis function to ensure accurate data; simple installation and calibration.

The electrode body is made of 316L stainless steel, which is corrosion-resistant and more durable. The seawater version can be plated with titanium, which also performs well under strong corrosion. Fully automatic electrode scraper, self-cleaning function, effectively prevent solid particles from covering the lens, improve measurement accuracy, and prolong use accuracy.

IP68 waterproof design, can be used for input measurement. Real-time online recording of Turbidity/MLSS/SS, temperature data and curves, compatible with all water quality meters of our company.

Suspended Solids (Sludge concentration) monitoring of water from waterworks, water quality monitoring of municipal pipeline network; industrial process water quality monitoring, circulating cooling water, activated carbon filter effluent, membrane filtration effluent, etc.

The internal upgrade of the sensor can effectively prevent the internal circuit from dampness and dust accumulation, and avoid damage to the internal circuit.

The transmitted light adopts stable invisible near-monochromatic infrared light source, which avoids the interference of chroma in liquid and external visible light to sensor measurement.And built-in luminosity compensation, improve the measurement accuracy.

The use of quartz glass lens with high light transmittance in the optical path makes the transmission and reception of infrared light waves more stable.

Wide range, stable measurement, high precision, good reproducibility.

Communication functions: Two photoelectric isolation signal output, one RS-485 communication interface (Modbus-RTU protocol compatible), the fastest communication interval is 50ms.One way 4 ~ 20mA current output, 4-20mA can reverse output; No instrument, can be directly connected to computers, PLC and other devices with RS485/4-20mA signal interface for data acquisition.It is convenient for users to integrate the sensor into the upper computer system and the IoT system and other industrial control environment.

Without meter, the sensor can be set online through software, from the machine address and baud rate, online calibration, restore factory, 4-20mA output corresponding range, modify the range, proportional coefficient and incremental compensation Settings.

Model No.

CS7863D

Power/Outlet

9~36VDC/RS485 MODBUS RTU

Measurement mode

90°+135°IR scattered light method, infrared dual beam

Dimensions

Diameter 50mm*Length 223mm

Housing material

PVC+316 Stainless steel

Waterproof rating

IP68

Measurement range

2-50000mg/L

Measurement accuracy

<measured value ±5%

Pressure resistance

≤0.3Mpa

Measuring temperature

0-45℃

Calibration

Standard liquid calibration, water sample calibration

Cable length

Standard 10m,can be extended to 100m

Thread

1 inch

Weight

2.0kg

Application

General applications, rivers, lakes, environmental protection, etc.


Product detail pictures:

Factory Supply Conductivity TDS Sensor - Digital Suspended Solids (Sludge concentration) Sensor  with Automatic Cleaning – Chunye detail pictures

Factory Supply Conductivity TDS Sensor - Digital Suspended Solids (Sludge concentration) Sensor  with Automatic Cleaning – Chunye detail pictures


Related Product Guide:

Our mission is to become an innovative supplier of high-tech digital and communication devices by providing value added design, world-class manufacturing, and service capabilities for Factory Supply Conductivity TDS Sensor - Digital Suspended Solids (Sludge concentration) Sensor with Automatic Cleaning – Chunye , The product will supply to all over the world, such as: Amsterdam, Jamaica, Australia, We have now a good reputation for stable quality goods, well received by customers at home and abroad. Our company would be guided by the idea of "Standing in Domestic Markets, Walking into International Markets". We sincerely hope that we could do business with car manufacturers, auto part buyers and the majority of colleagues both at home and abroad. We expect sincere cooperation and common development!
  • The sales manager has a good English level and skilled professional knowledge, we have a good communication. He is a warm and cheerful man, we have a pleasant cooperation and we became very good friends in private.
    5 Stars By Jodie from Manila - 2018.05.15 10:52
    The company's products very well, we have purchased and cooperated many times, fair price and assured quality, in short, this is a trustworthy company!
    5 Stars By Katherine from Porto - 2017.03.08 14:45
    Write your message here and send it to us