CS1540 Titanium Alloy Housing pH Sensor

Short Description:

Designed for particulate matter water quality.The electrode is made of ultra-bottom impedance-sensitive glass film, and it also has the characteristics of fast response, accurate measurement, good stability, and not easy to hydrolyze in thecase of low conductivity and high purity water.CS1540 pH electrode adopts the most advanced solid dielectric in the world and large-area PTFE liquid junction. Not easy to block, easy to maintain.The electrode adopts high-quality low-noise cable, which can make the signal output longer than 20 meters without interference.


  • Model NO.: CS1540
  • Materials: Plastic
  • Trademark: Twinno
  • Housing material: Titanium alloy
  • Certification: ISO9001, CE
  • Specification: pH zero: 7.00+/-0.25

Product Detail

Product Tags

CS1540 pH Sensor

Designed for particulate matter water quality.

CS1540 pH electrode adopts the most advanced solid dielectric in the world and large-area PTFE liquid junction. Not easy to block, easy to maintain. 

The long-distance reference diffusion path greatly prolongs the service life of the electrode in harsh environments. The newly designed glass bulb increases the bulb area, prevents the generation of interfering bubbles in the internal buffer, and makes the measurement more reliable.

Adopt Titanium alloy shell, upper and lower PG13.5 pipe thread, easy to install, no need for sheath, and  low installation cost. The electrode is integrated with pH, reference, solution grounding. 

The electrode adopts high-quality low-noise cable, which can make the signal output longer than 20 meters without interference. 

The electrode is made of ultra-bottom impedance-sensitive glass film, and it also has the characteristics of fast response, accurate measurement, good stability, and not easy to hydrolyze in the case of low conductivity and high purity water.

Model No.

CS1540

pH zero point

7.00±0.25pH

Reference system

SNEX Ag/AgCl/KCl

Electrolyte solution

3.3M KCl

Membrane resistance

<500MΩ

Housing material

Titanium alloy

Liquid junction

SNEX

Waterproof grade

IP68

Measurement range

0-14pH

Accuracy

±0.05pH

Pressure resistance

≤0.6Mpa

Temperature compensation

None

Temperature range

0-80℃

Calibration

Sample calibration, standard liquid calibration

Double Junction

Yes

Cable length

Standard 5m cable, can be extended to 100m

Installation thread

PG13.5

Application

Particulate matter water quality. 

 


  • Previous:
  • Next:

  • Write your message here and send it to us