CS6603D Digital COD Sensor Chemical Oxygen Demand COD Sensor

Short Description:

COD sensor is a UV absorption COD sensor, combined with a lot of application experience, based on the original basis of a number of upgrades, not only the size is smaller, but also the original separate cleaning brush to do one, so that the installation is more convenient, with higher reliability.It does not need reagent, no pollution, more economic and environmental protection. On-line uninterrupted water quality monitoring. Automatic compensation for turbidity interference, with automatic cleaning device, even if long-term monitoring still has excellent stability.


  • Model NO.: CS6603D
  • Trademark: twinno
  • Housing IP Rating: IP68

Product Detail

Product Tags

CS6603D Digital COD Sensor

Introduction

COD sensor is a UV absorption COD sensor, combined with a lot of application experience, based on the original basis of a number of upgrades, not only the size is smaller, but also the original separate cleaning brush to do one, so that the installation is more convenient, with higher reliability.It does not need reagent, no pollution, more economic and environmental protection.On-line uninterrupted water quality monitoring.Automatic compensation for turbidity interference, with automatic cleaning device, even if long-term monitoring still has excellent stability.

Testing principle

Many organic compounds dissolved in water are absorbent to ultraviolet   light. Therefore, the  total amount of organic pollutants in the water can be  measured  by measuring  the extent  to  which these organics  absorb ultraviolet light at 254nm.The sensor uses  two  light  sources --  254nm UV and 550nm UV reference light -- to automatically  eliminate  suspended  matter  interference,  resulting  in  more  stable  and reliable measurements.

Sensor features

Digital sensor, RS-485 output, support Modbus

No reagent, no pollution, more economic and environmental protection

Automatic compensation of turbidity interference, with excellent test performance

With self-cleaning brush, can prevent biological attachment, maintenance cycle more

Measuring Range

pH:-2~16.00pH ORP:-2000~+2000mV Tempreature:-10~150.0℃;

Technical parameters

Name Parameter
Interface Support RS-485, MODBUS protocols
COD Range 0.5 to 1 5 0 0 mg/L equiv.KHP
COD Accuracy <5% equiv.KHP
COD Resolution 0.01mg/L equiv.KHP
TOC Range 0.3 to 500mg/L equiv.KHP
TOC Accuracy <5% equiv.KHP
TOC Resolution 0.1mg/L equiv.KHP
Tur Range 0-300 NTU
Tur Accuracy <3% or 0.2NTU
Tur Resolution 0.1NTU
Temperature Range +5 ~ 45℃
Housing IP Rating IP68
Maximum pressure 1 bar
User Calibration one or two points
Power Requirements DC 12V +/-5% ,current<50mA(without wiper)
Sensor OD 50 mm
Sensor Length 214 mm
Cable Length 10m (default)

 


  • Previous:
  • Next:

  • Write your message here and send it to us