CS6714D Digital Ammonium Nitrogen Ion Sensor

Short Description:

Easy to connect to PLC, DCS, industrial control computers, general purpose controllers, paperless recording instruments or touch screens and other third party devices.


Product Detail

Product Tags

Introduction:

Ion selective electrode is a kind of electrochemical sensor that uses membrane potential to measure the activity or concentration of ions in the solution. When it comes into contact with the solution containing the ions which are to be measured, it will generate contact with the sensor at the interface between its sensitive membrane and the solution. Ion activity is directly related to membrane potential. Ion selective electrodes are also called membrane electrodes. This type of electrode has a special electrode membrane that selectively responds to specific ions. The relationship between the potential of the electrode membrane and the ion content to be measured conforms to the Nernst formula. This type of electrode has the characteristics of good selectivity and short equilibrium time, making it the most commonly used indicator electrode for potential analysis.

Product advantages:

CS6714D Ammonium Ion sensor is solid membrane ion selective electrodes, used to test ammonium ions in water, which can be fast, simple, accurate and economical;

The design adopts the principle of single-chip solid ion selective electrode, with high measurement accuracy; 

PTEE large-scale seepage interface, not easy to block, anti-pollution Suitable for wastewater treatment in the semiconductor industry, photovoltaics, metallurgy, etc. and pollution source discharge monitoring;l

High-quality imported single chip, accurate zero point potential without drift ;l

Technical parameters:

Model No.

CS6714D

Power/Outlet

9~36VDC/RS485 MODBUS

Measuring method

Ion electrode method

Housing material

PP

Size

30mm* 160mm

Waterproof rating

IP68

Measurement range

0~1000mg/L (Customizable)

Resolution

0.1mg/L

Accuracy

±2.5%

Pressure range

≤0.3Mpa

Temperature compensation

NTC10K

Temperature range

0-50℃

Calibration

Sample calibration, standard liquid calibration

Connection methods

4 core cable

Cable length

Standard 10m cable or extend to 100m

Mounting thread

NPT3/4’’

Application

General application, river, lake, drinking water environmental protection, etc.


  • Previous:
  • Next:

  • Write your message here and send it to us