Digital Ion Selective Sensor
-
CS6710D Digital Fluoride ion Sensor
Model No. CS6710D Power/Outlet 9~36VDC/RS485 MODBUS Measuring material Solid film Housing material PP Waterproof rating IP68 Measurement range 0.02~2000mg/L Accuracy ±2.5% Pressure range ≤0.3Mpa Temperature compensation NTC10K Temperature range 0-80℃ Calibration Sample calibration, standard liquid calibration Connection methods 4 core cable Cable length Standard 10m cable or extend to 100m Mounting thread NPT3... -
CS6718D Digital Hardness Sensor (Ca Ion)
Model No. CS6718D Power/Outlet 9~36VDC/RS485 MODBUS Measuring material PVC Film Housing material PP Waterproof rating IP68 Measurement range 0.2~40000mg/L Accuracy ±2.5% Pressure range ≤0.3Mpa Temperature compensation NTC10K Temperature range 0-50℃ Calibration Sample calibration, standard liquid calibration Connection methods 4 core cable Cable length Standard 10m cable or extend to 100m Mounting thread NPT3/4... -
CS6720D Digital Nitrate Ion Sensor
Model No. CS6720D Power/Outlet 9~36VDC/RS485 MODBUS Measuring method Ion electrode method Housing material POM Size Diameter 30mm*length 160mm Waterproof rating IP68 Measurement range 0.5~10000mg/L Accuracy ±2.5% Pressure range ≤0.3Mpa Temperature compensation NTC10K Temperature range 0-50℃ Calibration Sample calibration, standard liquid calibration Connection methods 4 core cable Cable length Standard 10m cab... -
CS6721D Digital Nitrite Sensor
Model No. CS6721D Power/Outlet 9~36VDC/RS485 MODBUS Measuring material Ion electrode method Housing material POM Waterproof rating IP68 Measurement range 0.1~10000mg/L Accuracy ±2.5% Pressure range ≤0.3Mpa Temperature compensation NTC10K Temperature range 0-50℃ Calibration Sample calibration, standard liquid calibration Connection methods 4 core cable Cable length Standard 10m cable or extend to 100m Mounting th... -
CS6712D Digital Potassium Ion Sensor
Easy to connect to PLC, DCS, industrial control computers, general purpose controllers, paperless recording instruments or touch screens and other third party devices.
The potassium ion selective electrode is an effective method to measure the potassium ion content in the sample. Potassium ion selective electrodes are also often used in online instruments, such as industrial online potassium ion content monitoring. , Potassium ion selective electrode has the advantages of simple measurement, fast and accurate response. It can be used with PH meter, ion meter and online potassium ion analyzer, and also used in electrolyte analyzer, and ion selective electrode detector of flow injection analyzer. -
CS6710D Digital Fluoride ion Sensor
The fluoride ion selective electrode is a selective electrode sensitive to the concentration of fluoride ion, the most common one is the lanthanum fluoride electrode.
Lanthanum fluoride electrode is a sensor made of lanthanum fluoride single crystal doped with europium fluoride with lattice holes as the main material. This crystal film has the characteristics of fluoride ion migration in the lattice holes.
Therefore, it has very good ion conductivity. Using this crystal membrane, the fluoride ion electrode can be made by separating two fluoride ion solutions. The fluoride ion sensor has a selectivity coefficient of 1.
And there is almost no choice of other ions in the solution. The only ion with strong interference is OH-, which will react with lanthanum fluoride and affect the determination of fluoride ions. However, it can be adjusted to determine the sample pH <7 to avoid this interference.