Products
-
CS3753GC ec conductivity meter
CS3753GC Contacting Conductivity Sensor New Original With contacting conductivity sensors, you can accurately measure electrolytic conductivity in a broad range of applications from high purity water to clean cooling water. These sensors are ideal for use in clean, non-corrosive liquid having conductivity less than 20,000 µS/cm.High Precision Temperature and Humidity Measurement:High Precision Soil Moisture Temperature And Humidity Sensor offers accurate measurement of temperature and humidity levels, making it ideal for various applications, including industrial use.Environmental water discharge monitoring, Point source solution monitoring, Wastewater treatment works, Diffuse pollution monitoring, IoT Farm, IoT Agriculture Hydroponics sensor, Upstream Petrochemicals, Petroleum Processing, Paper Textiles waste water, Coal, Gold and Copper Mine, Oil and Gas Production and Exploration, River water quality monitoring, Groundwater water quality monitoring, etc -
CS3753C Electrical Conductivity Sensor 4-20ma
electrode type liquid level meter uses the electrical conductivity of materials to measure high and low liquid levels. It can also be used for liquids and wet solids with weak electrical conductivity. The principle of the boiler electric contact level meter is to measure the water level according to the different conductivity of steam and water. The electric contact water level meter is composed of a water level measuring container, an electrode, an electrode core, a water level display lamp and a power supply. The electrode is mounted on a water level container to form an electrode water level transmitter. The electrode core is insulated from the water level measuring container. Because the conductivity of water is large and the resistance is small, when the contact is flooded with water, the short circuit between the electrode core and the container shell, the corresponding water level display light is on, reflecting the water level in the drum. The electrode in the steam is small because the conductivity of the steam is small and the resistance is large, so the circuit is blocked, that is, the water level display lamp is not bright. Therefore, a bright display light can be used to reflect the level of the water level. -
CS3743G digital conductivity meter Salinity EC TDS sensor
electrode type water level sensor comprises a cylinder with two ends closed by an end plate, and the cylinder body is provided with at least two electrode rods of different lengths, whose lengths correspond to different water levels; One end of the electrode rod is fixed on the end plate through the screw plug, and the insulating sleeve is lined between the electrode rod and the screw plug. The length of the electrode rod is different, using the conductivity of the water in the boiler, when the water level in the boiler changes, due to the contact and separation of the electrode rod and the furnace water of different water levels, the electrical circuit is closed or disconnected, so that the signal of the reaction water level change is transmitted out, and then it can be further processed according to the signal. The matching surface between the electrode rod, insulating sleeve, screw plug and end plate of the above electrode type water level sensor adopts a conical structure. The utility model has the advantages that the electrode type water level sensor takes the conductivity of water as the working principle, the sensing quality is stable, the false signal is not easy to be generated, the structure is simple, and the service life is long. -
CS3743 RS485 Water Conductivity Sensor
Conductivity digital sensor is a new generation of intelligent water quality detection digital sensor independently developed by our company. High performance CPU chip is used to measure conductivity and temperature. The data can be viewed, debugged and maintained through mobile app or computer. It has the characteristics of simple maintenance, high stability, excellent repeatability and multifunction, and can accurately measure the conductivity value in solution. Widely used in thermal power, chemical fertilizer, metallurgy, environmental protection, pharmaceutical, biochemical, food and tap water solution conductivity value of continuous monitoring. -
CS3733C Conductivity Electrode Long type
The following conductivity electrodes are independently developed and produced by our company. They can be used with DDG-2080Pro and CS3733C meters to measure the conductivity value in water in real time and have a wide range of applications.High precision and good stability;Anti-pollution and anti-interference;Integrated temperature compensation; Accurate measurement results, fast and stable response;The sensor connector can be customized.industrial control instruments are precision meters for measurement of conductivity or resistivity of solution. With complete functions, stable performance, simple operation and other advantages, they are optimal instruments for industrial measurement and control. -
CS3733C Conductivity Electrode Short type
It is used to continuously monitor and control the conductivity value/TDS value/salinity value and temperature value of aqueous solution. It is widely used in many fields. Such as monitoring and control of raw water and produced water quality of power plant cooling water, feed water, saturated water, condensate water and boiler water, ion exchange, reverse osmosis EDL, seawater distillation and other water-making equipment. 2 or 4 electrodes measurement design, anti-interference of ion cloud. 316L stainless steel/graphite wetted part has strong pollution resistance. High accuracy and linearity, the wire impedance does not affect the test accuracy. The electrode coefficient is highly consistent.Digital sensor, strong anti-interference ability, high stability, long transmission distance. -
CS3523 Conductivity EC TDS Sensor for River or Fish Pool Monitoring
CHUNYE Instrument’s online water quality analyzer is mainly used to test pH, conductivity, TDS, dissolved oxygen, turbidity, residual chlorine, suspended solids, ammonia, hardness,water color, silica, phosphate, sodium, BOD, COD, heavy metals, etc. We are committed to providing the best water quality monitoring solutions for users in all areas of pure water, ultra-pure water, drinking water, municipal wastewater, industrial wastewater, industrial circulating water, environmental monitoring, and university research, etc.
Mainly application of IrrigationpH ORP TDS DO EC Salinity NH4+ Ammonia Nitrate water quality sensors control board monitoring meter?
Environmental water discharge monitoring, Point source solution monitoring, Wastewater treatment works, Diffuse pollution monitoring, IoT Farm, IoT Agriculture Hydroponics sensor, Upstream Petrochemicals, Petroleum Processing, Paper Textiles waste water, Coal, Gold and Copper Mine, Oil and Gas Production and Exploration, River water quality monitoring, Groundwater water quality monitoring, etc -
Digital Optical RS485 Nitrite Nitrogen Sensor NO2-N
Principle
NO2 has an absorption at 210nm ultraviolet light. During operation, the sample flows through the slit, and the light emitted by the light source passes through the slit. Some of the light is absorbed by the moving sample in the slit, while the rest of the light passes through the sample and reaches the detector on the other side of the probe, where the nitrate concentration value is calculated. -
Digital RS485 Optical Nitrate Nitrogen Sensor NO3-N
Principle
NO3 has an absorption at 210nm ultraviolet light. During operation, the sample flows through the slit, and the light emitted by the light source passes through the slit. Some of the light is absorbed by the moving sample in the slit, while the rest of the light passes through the sample and reaches the detector on the other side of the probe, where the nitrate concentration value is calculated. -
Digital RS485 Output COD BOD TOC Sensor
COD sensor is a UV absorption COD sensor, combined with a lot of application experience, based on the original basis of a number of upgrades, not only the size is smaller, but also the original separate cleaning brush to do one, so that the installation is more convenient, with higher reliability.
It does not need reagent, no pollution, more economic and environmental protection.On-line uninterrupted water quality monitoring.Automatic compensation for turbidity interference, with automatic cleaning device, even if long-term monitoring still has excellent stability.
Many organic compounds dissolved in water are absorbent to ultraviolet light. Therefore, the total amount of organic pollutants in the water can be measured by measuring the extent to which these organics absorb ultraviolet light at 254nm. -
Digital RS485 Output COD BOD TOC TURBIDITY Sensor
COD sensor is a UV absorption COD sensor, combined with a lot of application experience, based on the original basis of a number of upgrades, not only the size is smaller, but also the original separate cleaning brush to do one, so that the installation is more convenient, with higher reliability.
It does not need reagent, no pollution, more economic and environmental protection.On-line uninterrupted water quality monitoring.Automatic compensation for turbidity interference, with automatic cleaning device, even if long-term monitoring still has excellent stability. -
Digital conductivity sensor series CS3742ZD
CS3740ZD Digital Conductivity Sensor: Conductivity sensor technology is an important field of engineering technology research, suitable for high-conductivity applications in semiconductor, electric power, water and pharmaceutical industries. These sensors are compact and easy to use. Determining the specific conductivity of an aqueous solution is more and more important for determining the impurities in the water. The measurement accuracy is greatly affected by factors such as temperature changes, surface polarization of contact electrodes, and cable capacitance. -
CS3740 Conductivity Sensor
Measuring specific conductivity of aqueous solutions is becoming increasingly important for determining impurities in water.The measurement accuracy is greatly affected by temperature variation, polarization of the contact electrode surface, cable capacitance, etc.Twinno has designed a variety of sophisticated sensors and meters that can handle these measurements even in extreme conditions.
Twinno's 4-electrode sensor has been proven to operate over a wide range of conductivity values. It is made of PEEK and is suitable for simple PG13/5 process connections.The electrical interface is VARIOPIN, which is ideal for this process.
These sensors are designed for accurate measurements over a wide electrical conductivity range and are suitable for use in the pharmaceutical, food and beverage industries, where product and cleaning chemicals need to be monitored.Due to industry hygiene requirements, these sensors are suitable for steam sterilization and CIP cleaning.In addition, all parts are electrically polished and the materials used are FDA-approved. -
CS3790 Electromagnetic Conductivity Sensor
Electrodeless conductivity sensor generates current in the closed loop of the solution, and then measures the current to measure the conductivity of the solution. The conductivity sensor drives the coil A, which induces alternating current in the solution; coil B detects the induced current, which is proportional to the conductivity of the solution. The conductivity sensor processes this signal and displays the corresponding reading. -
T6036 On-line Acid and Alkali Salt Concentration Meter
Industrial on-line acid/alkali/salt concentration monitor is a water quality on-line controller with microprocessor. The instrument is widely used in thermal power, chemical industry, steel pickling and other industries, such as the regeneration of ion exchange resin in power plant, chemical and chemical industrial process, etc., to continuously detect and control the concentration of chemical acid or alkali in aqueous solution.