T6085 Online Ultrasonic Liquid Level Meter Water Level Measurement Transmitter

Short Description:

The Ultrasonic Liquid Level sensor can be used to continuously and accurately determine the Liquid Level. Stable data, reliable performance; built-in self-diagnosis function to ensure accurate data; simple installation and calibration.Determination of sludge interface in sewage treatment sedimentation tank, secondary settling tank, sludge thickening tank; determination of mud level in water plant sedimentation tank, water supply plant (sedimentation tank), sand washing plant (sedimentation tank), electric power (mortar sedimentation tank). Working principle: ultrasonic mud water interface measurement is installed in the water ultrasonic sensor, To launch an ultrasound pulse on the surface of the underwater mud, This pulse is reflected back when it hits the mud, can be received by the sensor again; From ultrasound to re-receiving, the time is proportional to the distance of the sensor to the surface of the object under test; The meter detected the time, And according to the current temperature (sensor measurement) underwater sound speed, Calculate the distance from the surface of the object to the sensor, The liquid level is further converted.


  • Measurement range: 0~20.00m;
  • Measurement unit: Ultrasonic
  • Resolution: 0.001m;
  • Temperature: -10։ 150.0℃ ( Based on sensor)
  • Working temperature: -10։ 60℃

Product Detail

Product Tags

Online Ultrasonic Liquid Level Meter T6085

T6085
water level measurement transmitter
water level measurement transmitter
Function

The Ultrasonic Liquid Level sensor can be used to continuously and accurately determine the Liquid Level. Stable data, reliable performance; built-in self-diagnosis function to ensure accurate data; simple installation and calibration.

Typical Use

The online Ultrasonic Liquid Level is an online analytical instrument designed to measure the Liquid Level of water from waterworks, municipal pipeline network, industrial process water quality monitoring, circulating cooling water, activated carbon filter effluent, membrane filtration effluent, etc. especially in the treatment of municipal sewage or industrial wastewater. Whether evaluating activated sludge and the entire biological treatment process, analyzing wastewater discharged after purification treatment, or detecting sludge concentration at different stages, the Ultrasonic Liquid Level meter can give continuous and accurate measurement results.

Mains Supply
85~265VAC±10%,50±1Hz,power consumption ≤3W;
9~36VDC,power consumption:≤3W;
Measuring Range
Liquid Level: 0~5m, 0~10m, 0~20m

Online Ultrasonic Liquid Level Meter T6085

1

Measurement mode

2

Calibration mode

3

Trend chart

4

Setting mode

Features

1. Large display, standard 485 communication, with online and offline alarm, 144*144*118mm meter size, 138*138 hole size, 4.3 inch large screen display.

2. The data curve recording function is installed, the machine replaces the manual meter reading, and the query range is arbitrarily specified, so that the data is no longer lost.

3. Real-time online recording of liquid level, temperature data and curves, compatible with all water quality meters of our company.

4. 0-5m, 0-10m, 0~20m, a variety of measuring ranges are available, suitable for different working conditions, the measurement accuracy is less than ±5% of the measured value.

5. The new choke inductance of the power board can effectively reduce the influence of electromagnetic interference, and the data is more stable.

6. The design of the whole machine is waterproof and dustproof, and the back cover of the connection terminal is added to extend the service life in harsh environments.

7. Panel/wall/pipe installation, three options are available to meet various industrial site installation requirements

Electrical connections

Electrical connection The connection between the instrument and the sensor: the power supply, output signal, relay alarm contact and the connection between the sensor and the instrument are all inside the instrument. The length of the lead wire for the fixed electrode is usually 5-10 meters, and the corresponding label or color on the sensor Insert the wire into the corresponding terminal inside the instrument and tighten it.

Instrument installation method
1
Technical specifications
Measurement range 0~5m, 0~10m, 0~20m (Optional)
Measurement unit m
Resolution 0.01m
Basic error ±1%F.S
Temperature 0~50
Temperature Resolution 0.1
Temperature Basic error ±0.3
Current outputs Two 4~20mA,20~4mA,0~20mA
Signal output RS485 MODBUS RTU
Other functions Data record &Curve display
Three relay control contacts 5A 250VAC,5A 30VDC
Optional power supply 85~265VAC,9~36VDC,power consumption≤3W
Working conditions No strong magnetic field interference around except the geomagnetic field.˫
Working temperature -10~60
Relative humidity ≤90%
Waterproof rating IP65
Weight 0.8kg
Dimensions 144×144×118mm
Installation opening size 138×138mm
Installation methods Panel & wall mounted or pipeline

CS6085D Digital liquid level Sensor

1

                                   Model NO.

CS6085D

Power/Signal Output

9~36VDC/RS485 MODBUS RTU
                     Measure methods Ultrasonic wave
                      Housing material PC/PE/PTFE
                      Waterproof grade IP68

Measurement range

0-5/0-10/0-20 m (Optional)

Measuring blind zone

<8/20 cm

                                   Accuracy

<0.3%
                    Temperature range -25-80℃

                               Cable length

Standard 10m cable
 

                                 Application

Sewage level, industrial water level, river, well or corrosiveliquid level

  • Previous:
  • Next:

  • Write your message here and send it to us