Products
-
CS3790 Electromagnetic Conductivity Sensor
Electrodeless conductivity sensor generates current in the closed loop of the solution, and then measures the current to measure the conductivity of the solution. The conductivity sensor drives the coil A, which induces alternating current in the solution; coil B detects the induced current, which is proportional to the conductivity of the solution. The conductivity sensor processes this signal and displays the corresponding reading. -
T6036 On-line Acid and Alkali Salt Concentration Meter
Industrial on-line acid/alkali/salt concentration monitor is a water quality on-line controller with microprocessor. The instrument is widely used in thermal power, chemical industry, steel pickling and other industries, such as the regeneration of ion exchange resin in power plant, chemical and chemical industrial process, etc., to continuously detect and control the concentration of chemical acid or alkali in aqueous solution. -
Acid Alkali NaCl/NaOH/HCl/NHO3/KOH Conductivity Concentration Controller/Analyzer/Meter T6036
Industrial online conductivity meter is a microprocessor-based water quality online monitoring control instrument, the salinometer measures and supervises the salinity (salt content) by conductivity measurement in fresh water. The measured value is displayed as percent and by comparing the measured value to a user defined alarm set point value, relay outputs are available to indicate if salinity is above or below the alarm set point value. -
On-line Acid and Alkali Salt Concentration Meter T6036
Industrial online conductivity meter is a microprocessor-based water quality online monitoring control instrument, the salinometer measures and supervises the salinity (salt content) by conductivity measurement in fresh water. The measured value is displayed as percent and by comparing the measured value to a user defined alarm set point value, relay outputs are available to indicate if salinity is above or below the alarm set point value. -
Online Electrode Digital Conductivity Sensor For Industrial Water RS485 tds sensor CS3740D
Measuring specific conductivity of aqueous solutions is becoming increasingly important for determining impurities in water.The measurement accuracy is greatly affected by temperature variation, polarization of the contact electrode surface, cable capacitance, etc.Twinno has designed a variety of sophisticated sensors and meters that can handle these measurements even in extreme conditions.ItismadeofPEEKandissuitableforsimpleNPT3/4”process connections.Theelectricalinterfaceiscustomizable,whichisidealforthisprocess. Thesesensorsaredesignedforaccuratemeasurementsoverawideelectrical conductivityrangeandaresuitableforuseinthepharmaceutical,foodandbeverage industries,whereproductandcleaningchemicalsneedtobemonitored. -
Online Chlorophyll Sensor RS485 Output Usable on Multiparameter CS6401
Based on the fluorescence of the pigments to measurement the target parameters , it can be identified before the impact of algal bloom.No need for extraction or other treatment, rapid detection, to avoid the impact of shelving water samples;Digital sensor, strong anti-interference ability, long transmission distance;Standard digital signal output can be integrated and networked with other devices without controller. Installation of sensors on site is convenient and fast, realizing plug and play. -
T4043 Online Conductivity / Resistivity /TDS / Salinity Meter
Industrial online conductivity meter is a microprocessor-based water quality online monitoring control instrument, the salinometer measures and supervises the salinity (salt content) by conductivity measurement in fresh water. The measured value is displayed as ppm and by comparing the measured value to a user defined alarm set point value, relay outputs are available to indicate if salinity is above or below the alarm set point value.This instrument is widely used in power plants, petrochemical industry, metallurgical electronics, mining industry, paper industry, medicine, food and beverage, water treatment, modern agricultural planting and other industries. It is suitable for softening water, raw water, steam condensate water, seawater distillation and deionized water, etc. It can continuously monitor and control the conductivity, resistivity, TDS, salinity and temperature of aqueous solutions. -
CON500 Benchtop Digital Conductivity/TDS/Salinity Meter Tester for Lab
Delicate, compact and humanized design, space saving. Easy and quick calibration, optimum accuracy in Conductivity, TDS and Salinity measurements, easy operation comes with high luminant backlight make the instrument an ideal research partner in laboratories, productions plants and schools.
One key to calibrate and automatic identification to complete the correction process; clear and readable display interface, excellent anti-interference performance, accurate measurement, easy operation, combined with high brightness backlight lighting; -
Laboratory Benchtop pH/ORP/lon/Temp Meter Conductivity Ph Meter pH500
Simple operation, powerful functions, complete measuring parameters, wide measurement range;
Four sets with 11 points standard liquid , one key to calibrate and automatic identification to complete the correction process;
Clear and readable display interface, excellent anti-interference performance, accurate measurement, easy operation, combined with high brightness backlight lighting;
Brief and exquisite design, space saving, easy calibration with calibrated points displayed, optimum accuracy, simple operation comes with back lit. PH500 is your reliable partner for routine applications in laboratories, productions plants and schools. -
TSS200 Portable Handheld Digital Suspended Solid Meter TSS Meter Turbidity
Suspended solids refers to solid material suspended in the water, including inorganic, organic matter and clay sand, clay, microorganisms, etc. Those do not dissolve in the water. Suspended matter content in water is one of the indexes to measure the degree of water pollution. -
Handheld Digital pH/ORP/Ion/ Temperature Meter High Precision Portable Meter PH200
PH200 series products with precise and practical design concept;
Simple operation, powerful functions, complete measuring parameters, wide measurement range;
Four sets with 11 points standard liquid , one key to calibrate and automatic identification to complete the correction process;
Clear and readable display interface, excellent anti-interference performance, accurate measurement, easy operation, combined with high brightness backlight lighting;
PH200 is your professional testing tool and reliable partner for laboratories, workshops and schools daily measurement work. -
T6030 Online PH Electrode Conductivity / Resistivity / TDS / Salinity Meter
Industrial online conductivity meter is a microprocessor-based water quality online monitoring control instrument, the salinometer measures and supervises the salinity (salt content) by conductivity measurement in fresh water. The measured value is displayed as ppm and by comparing the measured value to a user defined alarm set point value, relay outputs are available to indicate if salinity is above or below the alarm set point value. -
ph ORP Controller Electrode ph meter Transmitter Water ph tds Tester CS2733D
Double salt bridge design, double layer seepage interface, resistant to medium reverse seepage. The ceramic pore parameter electrode oozes out of the interface and is not easy to be blocked, which is suitable for monitoring of common water quality environmental media. High-strength glass bulb design, the glass appearance is stronger. The electrode adopts low noise cable, the signal output is farther and more stable Large sensing bulbs increase the ability to sense hydrogen ions, and perform well in common water quality. -
Salinity Tester Meter For Aquaculture Digital Monitor Water Quality Analyser CS3743D
Product Description
For continuous monitoring and control of conductivity / TDS and temperature values of aqueous solutions. Widely used in power plants, petrochemical, metallurgy, paper industry, environmental water treatment, light industrial electronics and other fields. For example, monitoring and control of raw water and water quality of water production equipment such as power plant cooling water, recharge water, saturated water, condensate water and furnace water, ion exchange, reverse osmosis EDL,seawater distillation. -
CS6721D Nitrate Ion Selective Electrode RS485 Output Water quality Sensor ca2+
Product advantages:
1.CS6721D Nitrite ion single electrode and composite electrode are solid membrane ion selective electrodes, used to test free chloride ions in water, which can be fast, simple, accurate and economical
2.The design adopts the principle of single-chip solid ion selective electrode, with high measurement accuracy
3.PTEE large-scale seepage interface, not easy to block, anti-pollution Suitable for wastewater treatment in the semiconductor industry, photovoltaics, metallurgy, etc. and pollution source discharge monitoring
4.High-quality imported single chip, accurate zero point potential without drift